RECONDITIONED CAT 826H
CAT C15 ACERT Engine
Powershift Transmission
Cab with A/C
Automatic Reversing Fan
Command Control Steering
CAT SU Landfill Blade
Automatic Blade Positioning
CAT Chopper Style Wheels
No Spin Rear Differential
Front & Rear Striker Bars
Front Window Guard
Rated at 401 HP
Weight 82,000 LBS
ECM Idle Hours: 5,536, CAT SU Landfill Blade, CAT Chopper Style Wheels, Other Wheel Options Available, Auto Reversing Fan, Command Control Steering, Front & Rear Striker Bars, This Unit Has Been Reconditioned In Our Shops, All Needed Repairs Have Been Completed, Warranty Included
The following was completed by Marcel Equipment:
Upon arrival to our yard, all covers & guards were removed & machine was power washed
Visual & operational inspections were completed
Engine oil filter was cut open & checked for contaminates, all clean
Transmission filters were cut open & checked for contaminates, all clean
Hydraulic filters were cut open & checked for contaminates, all clean
All suction screens & magnets were checked for contaminates, all clean
Checked both differentials, oil levels good & oils clean
Changed all oils
Changed coolant
Checked brake system, good
Checked parking brake, good
Checked articulation, good
Verified the following pressures to ensure within OEM specs:
- Hoist
- Steering
- Brake
- Pilot
- Engine oil
- Fuel
- Boost
- Transmission pump
- Transmission lube
- Torque inlet
- Torque outlet
- Accumulator
- Stall speed and full stall
Replaced transmission speed sensor
Replaced transmission solenoids
Replaced torque converter speed sensor
Replaced remote ground shutoff switch
Replaced blade cylinder mounting bushings
Replaced blade mount yoke bearing
Installed REBUILT turbo
Installed NEW exhaust heat wrap
Installed NEW fuel separator housing
Replaced engine belts with NEW
REBUILT parking brake assembly
Replaced required lines, hoses and tubes (almost all NEW hoses installed)
Serviced electrical bay
Cleaned & serviced complete HVAC system
Serviced A/C system
Reconditioned cab
REBUILT throttle pedal
REBUILT blade control joystick
Checked all gauges, controls, switches, lights
Completed all required misc repairs
Checked all grease lines & greased unit
Tested & serviced batteries & connections
All mechanical & cosmetic repairs have been completed
Machine was then sand blasted, primed, painted & detailed. |